Skid Steer Loader (HT-60A)
![]() Skid Steer Loader (HT-60A) |
Product Description
Every Racoon skid steer loader can adapt to various working requirements by replacing different attachments.
The racoon skid steers are not only saves money, but also gets a complete match between the body and the attachment, which is much better than the conventional single model.
Product Feature
For the industrial field, it requires a quick and higher power output for loader. This loader model may be used widely for power plant, steel factory, cement factory, chemical fertilizer plant, sewage processing plant, chemical factory and so on to sort out, collect and carry large materials. Since the higher power skid-steer loader is more popular in the special environment of industrial area. Additionally, ht60a loader has good compatibility for high power tools, which offers wide operation scope for the loader.
1. The motor it is adopted is made in china, with power of 45kw; And its rated loading capacity is increased to 860kg and volume of scraper pan to 0.41m3. It makes the domestic motor integrate well with the imported dynamic members.
2. The work arm is available to lock by itself, which may prevent error action and avoid the work arm from fall suddenly to cause accident.
3. The safety locking function of driving cab when toppling backward. When the loader is under maintenance and repair, it must topple over the driving cab backwards; Whereas the driving cab is supported by gas spring; If it is used frequently, it may reduce the reliability; By using the safety lock, it will lock the driving cab by mechanical mechanism, so it is very safe and reliable.
4. A new oil return pipe is added so as to be used when hydraulic members of some auxiliary tools leak.
Standard Configuration
STANDARD EQUIPMENT
Safety bar & seat belt
Lock-out for travel,
Lift & bucket cylinder Controls
. 2 levers for travel
. 1 pedals for attachment
Hand throttle lever
Monitors
. Water separator
. Engine preheater
. Battery charging
. Engine oil pressure
Gauges & switch
Hour meter
Lgintion key
Belly pan
Boom locking bar
Sound suppression package
Work lights 2 front, 1 rear
Quick coupler for attachment
Audible alarm
Auxiliary hydraulic piping
OPTIONAL EQUIPMENT
PORS/FORS canopy
. Hydraulic oil temperature
. Room lamp
. Safely lock for hydraulics
. Cigarette lighter
Dual dry type air cleaner
Spark arresting mufller Locks, fuel tank cap
Enclosed cabin
. Heater
. Wiper
Hand only control
Foot accelerator pedal
Self leveling system
Fender & back mirrors
Master switch
Pre cleaner
Engine overheat
Rotating beacon lamp
Tire
Bucket
| DESCRIPTION | UNIT | HT-60A | |||||
| Rated operating capacity | lb(kg) | 1895(860) | |||||
| Tipping load | lb(kg) | 3791(1720) | |||||
| Operating weight | lb(kg) | 6290(2850) | |||||
| ENGINE | Maker/Model | 490BPG | |||||
| Gross output | HP/PS(KW) | 60.3/61.2(45) | |||||
| Net output | HP/PS(KW) | 58.8/59.7(43.9) | |||||
| Rated speed | rpm | 2650 | |||||
| Cooling | Water | ||||||
| GENERAL | Steering control | 2Levels | |||||
| Loader controls | 1Pedals | ||||||
| Tires-standars | 10.0-16.5 | ||||||
| Max.travel speed | mph(km/h) | 6.5(10.5) | |||||
| HYDRAULICS | Lader pump flow | gph(l/min) | 13.8(52.2) | ||||
| Loader pressure | psi(bar) | 2465(170) | |||||
| A | Length with bucket | in(mm) | 129(3270) | ||||
| B | Height to cab top | in(mm) | 78(1983) | ||||
| C | Wheelbase | in(mm) | 38(991) | ||||
| D | Ground Clearance | in(mm) | 7.9(201) | ||||
| E | Overall Operating Height | in(mm) | 154(3906) | ||||
| F | Height to bucket pivot pin | in(mm) | 118(2996) | ||||
| G | Max dump height | in(mm) | 89.1(2264) | ||||
| H | Reach at max.dump | in(mm) | 25.3(642) | ||||
| I | Forward Tilt | 30° | |||||
| K | Lenght w/o Bucket | 102(2605) | |||||
| L | Departure angle | 16° | |||||
| J | Back Angle at max height | 30° | |||||
| M | Dump angle | in(mm) | 43° | ||||
| O | Overall Width | in(mm) | 68.5(1740.0) | ||||
| N | Bucket Width | in(mm) | 69.3(1760) | ||||
| Bucket cap.heaped | ft³(m³) | 14.4(0.41) | |||||
| Bucket cap.struck | ft³(m³) | 9.5(0.32) | |||||
| Fuel tank capacity | gal(L) | 15.5(58.6) | |||||
| Hydraulic system capacity | gal(L) | 15.5(58.6) | |||||
More Product Features
| Trademark: | Racoon |
|---|---|
| Model NO.: | HT-60A |
| Standard: | CE, ISO9001, ROPS&FOPS |
| Productivity: | 150 Pcs/Month |
| Origin: | CHINA |
| Packing: | container |
| Export Markets: | North America, South America, Eastern Europe, Southeast Asia, Africa, Oceania, Mid East, Eastern Asia, Western Europe |
| Company: | Zhejiang Herotime Machinery Co., Ltd. |
Other products from this company
Most Popular
-

Bulldozer YS-A2 (17400kg, 150HP)
Bulldozer YS-A2 Engine model: Cummins ... -

Rexroth A2F Motor
Rexroth A2F hydraulic axial piston pump 1. Bent ... -

Mining Bulldozer 165HP Series
PENGPU PD165Y SERIES BULLDOZER 1. Advanced ...
-

Hydraulic Breaker Hammer
Unique Structural design Rapidly switching speed ... -

Excavator 24 Ton (W2245)
24 ton excavator, Isuzu (Japan) engine, Kawasaki ... -

Used Wheel Loader
CAT 950F wheel loader, wheel loader, CAT wheel ...
-

SD13 SD16 SD22 SD32 Bulldozers, Crawler Bulldozer
ShanTui ( Komatsu ) brand bulldozers, Golden ... -

Wheel Loader (WLX500F)
WLX500F is a popular wheel loader of high ... -

DH 500 Rock Bucket
DH500 Bucket 1. Standard, rock, heavy duty ...
-

8 Ton Wheel Excavator/Bule Color/Small Wheel Equipment
Item Specifications Picture Bucket capacity 0.35 ... -

Mini Skid Steer Loader with CE (Augger Attached)
We can offer the mini skid steer loader with more ... -

Wheel Loader (CXX918)
CXX918 1.8Ton wheel loader with CE approval ...
-

Komatsu Side Pin Teeth and Adapter (20x-70-14160)
We produce all kinds of bucket teeth, Namely: ... -

6-Tine Ripper (FTR-150)
Model ftr-150 Dimensions(l*w*h) 1510*400*1020mm ... -

Loader(SEM659)
The engine of SEM659 loader adopts Shangchai ...
Quick Products |
Inquiry Basket (

